@Boydrone wrote:
Hi guys! firstly, I just want to say that I've been following this project for a LOOOONGGG time, but of course, life gets in the way of personal hobbies/projects. I'm finally getting back to my hobbies and I decided to start with APM 2.6 on a rover before getting up in the air again since that gets a little more complex.
Anyhow, I've got a problem as my title suggests that I've been working through all weekend...Cant seem to find any resolution.
My servos arent responding to my radio inputs... I know the APM registers the I/Os since when I'm connected via USB I can calibrate and see the outputs. Once I disconnect, hook up the battery, and try to get it going, no go.
Regarding the flight modes, I've tried them all. I dont seem to see any arming options. So I'm sticking to Auto and Manual mode to troubleshoot this problem. If it matters at all, I'm using an older futuba skysport 6 72 Mhz radio with a Rx that requires power to function as well. I tried supplying power to the receiver first, then I also tried powering through the power module. the JP1 pins are disconnected.
I need help to get this going!
Posts: 8
Participants: 2